dgore Posted June 4, 2009 Share Posted June 4, 2009 The text of the manual is confusing in terms of limit specifications: "The 4.7K resistor packs used will allow 12-24V flag inputs. If 0-5V flags are used, then a 1KΩ resistor pack (RP) can be placed in either RP45 or RP46 ..... If these resistor packs are not added, all flags (±Limits, Home, User, and amplifier fault) will be referenced from 0-5V." So do I use a 1K resistor pack or no resistor pack for 0/+5V limits? Link to comment Share on other sites More sharing options...
dgore Posted June 4, 2009 Author Share Posted June 4, 2009 Answered my own question (partially) by experiment: Without the resistor packs, 5V does not seem to be sensed, but 24V is. Not sure how low I can go. Sounds like another experiment. Link to comment Share on other sites More sharing options...
steve.milici Posted February 24, 2014 Share Posted February 24, 2014 The confusing wording will be changed on the next update. The last sentence should read: "If these resistor packs are not added, all flags (Limits, Home, User, and amplifier fault) will be referenced from 12-24V." Link to comment Share on other sites More sharing options...
Recommended Posts