Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Resolver excitation signal on GeoBrick LV
#1
On a GeoBrick LV with the resolver feedback option, the Excitation Output is shown on Pin 15 (GeoBrick LV User Manual, p52). Is this the positive excitation signal? If so, is the negative excitation signal on the same pin as the Common Ground (Pin 12)?
#2
Hi wlewis,

Yes. You can connect the positive side of the resolver primary circuit to Resolver Excitation Output (Pin 15) and negative side to GND (Pin 12) of X1 through X8 connectors.

Regards,
Sina Sattari
Hardware Engineering Manager
Delta Tau Data Systems, Inc.


Forum Jump:


Users browsing this thread: 1 Guest(s)