Jump to content
OMRON Forums

Fixed error trapping of invalid system commands by gpascii utility


dzrong

Recommended Posts

Hello Everyone,

 

There is a Update in the V1.4 Firmware talking in the Power PMAC Software Reference Manual, it's "Fixed error trapping of invalid system commands by gpascii utility".

What's problem will be cause by this error if using V1.3 Firmware?

If new communication can't be established by GPASCII command,and tell you "Gpascii input/output error",is't possible cause by this error?

 

Thanks

Link to comment
Share on other sites

  • Replies 1
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

dzrong,

 

The problem which was fixed from 1.3 to 1.4 was caused by sending invalid system commands through "system" function. For example "system la" instead of a valid command "system ls".

 

The problem you're mentioning usually is caused by a bad memory or bad connection between the flash memory daughter card and the CPU.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.

×
×
  • Create New...