JeffLowe Posted March 1, 2012 Share Posted March 1, 2012 The hardware reference manual lists the digital feedback as supporting "multiple serial feedback protocols". Is there any more information about what is supported, and is Biss C one of these? Thanks, Jeff Link to comment Share on other sites More sharing options...
curtwilson Posted March 6, 2012 Share Posted March 6, 2012 Jeff: The ACC-24E3 manual that is now available on the forum has over 30 pages on the serial encoders it supports. The information is also available in the User's Manual chapter on Setting Up Feedback. Biss-C is not one of the protocols supported by the ACC-24E3. Unfortunately, the protocol was not finalized when we had to cut silicon on the "DSPGATE3" ASIC used in the ACC-24E3. However, it is supported in the FPGA-based ACC-84E, which can be used in both Turbo PMAC and Power PMAC systems. Link to comment Share on other sites More sharing options...
Sina.Sattari Posted March 7, 2012 Share Posted March 7, 2012 Link for ACC-24E3 manual: http://forums.deltatau.com/filedepot/download.php?f=Power%20PMAC/Manuals/Hardware%20Reference%20Manual/ACC-24E3.pdf [FILE REMOVED] Link to comment Share on other sites More sharing options...
Recommended Posts