terrydeltasigmacorp.com Posted October 4, 2011 Share Posted October 4, 2011 Do you have any tech notes on setting up a Macro system with ACC-82Ms and Yaskawa Sigma II drives? I have a GEO brick controller with MACRO and 5 Yaskawa Sigma II drives with ACC-82M cards on them. Thanks Link to comment Share on other sites More sharing options...
mbalentine Posted October 5, 2011 Share Posted October 5, 2011 This covers basic setup, but you might be asking for something more detailed. MACRO is pretty much the same on all controllers so this should apply directly to a Brick. From the HomePage: Support-> Documentation-> Manuals-> MACRO Control System-> MACRO Peripherals-> ACC-82M Might also be something in the Tech Notes section (?) Link to comment Share on other sites More sharing options...
terrydeltasigmacorp.com Posted October 5, 2011 Author Share Posted October 5, 2011 Thanks I looked through the manuals list online and wasn't able to find the ACC-82M manual. I just didn't look deep enough into the folders. I will read this manual respond if I still have questions. Thanks again. Link to comment Share on other sites More sharing options...
Recommended Posts