Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
PMAC Tuning Pro error
#1
PMAC tuning pro was working correctly earlier. Now, when it tries to download the auto-generated PLC code it generates an error because it puts the string "(null)" on five lines.

Here is the contents of C:\Program Files\Delta Tau\PMAC Executive Pro2 Suite\PmacTuningPro2\PositionStepTurbo#3.pmc:
Code:
;Position Step Trajectory Program For Turbo
(null)
(null)
(null)
(null)
(null)
M923->*
M902->*
M922->*
M921->*
M920->*
M919->*
M913->*
M914->*
M923->*
M902->X:0,24
M922->X:$10F0,24
M921->X:$10F1,24
M919->X:$6,19
M913->D:$00188
M914->Y:$1c0,2,1
OPEN PLC 31
CLEAR
M919=1
M913=M913+P907
M921=M902
WHILE(M902-M921<P906)
ENDW
M913=M913-P907
M922=M902
WHILE(M902-M922<P906)
ENDW
M919=0
DISABLE PLC 1..31
P901=123
CLS
M923=12345
#3J/DEFGAT
GAT
ENDG I48=0
DEFGAT
I5=I5|2
P907=1000*I308*32
P906=500*8388608/I10
P901=-1
I3=2 #3J/
ENA PLC 31
Reply
#2
The forum is not monitored for bug reports. Please use http://forums.deltatau.com/bugzilla to report any bugs.

The bug has been filed under: http://forums.deltatau.com/bugzilla/show_bug.cgi?id=578
Sina Sattari
Hardware Engineering Manager
Delta Tau Data Systems, Inc.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)