mjunker Posted September 19, 2011 Share Posted September 19, 2011 I have two UMAC crates with a 16-Axis MACRO CPU in each one connected to a VME Ultralite by a fiber ring. I cannot seem to find what the appropriate SW1 and SW2 settings for each of the CPU card in any of the manuals. I currently have SW1=7 SW2=0 for the first macro station card and SW1=7 and SW2=2 for the second macrostation card. I would like all nodes activated. Link to comment Share on other sites More sharing options...
Omron Forums Support Posted September 19, 2011 Share Posted September 19, 2011 As page 10 of the MACRO 16 CPU HRM says: So if you want all Servo nodes to be active, set SW1=7. SW2 determines which Master IC# to which to listen. Link to comment Share on other sites More sharing options...
Recommended Posts