Jump to content
OMRON Forums

serial cable pinouts


Guest DavisG

Recommended Posts

For those who need a serial cable ( RS232 or RS485 ) connection to a pmac board of any age I have attached the pdf containing all serial cable pinouts.

 

Note: If using the old 26 pin connector the easiest thing is to use a press on ribbon cable DB25 connector to a press on ribbon cable IDC26 connector. Cut wire 26 at the DB25. Then use a standard DB25 to DB9 adapter. If using the 10 pin connector the easiest thing is to use a press on ribbon cable DB9 connector to a press on ribbon cable IDC10 connector. Cut wire 10 at the DB9.

 

for search compatibility - RS-232 or RS-485

serial cable.pdf

Link to comment
Share on other sites

  • Replies 0
  • Created
  • Last Reply

Popular Days

Popular Days

Guest
This topic is now closed to further replies.

×
×
  • Create New...