Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Info and parts needed for PMAC PC board
#1
Just bought another backup board for my ancient press brakes.

1. This board is sn 8417 and it has a much larger eeprom for the firmware on the daughter board. Can I flash this with my pe win just like the other ones I have?

2. The board arrived without the metal tab that wraps around the 60 pin connector and locates it in the PC backplane. Can I buy one? If so where?
Reply
#2
andreslobo,

Please post the part number of the base board and CPU. The part numbers usually start with a 603 or 602 number.

Regards,
Sina Sattari
Hardware Engineering Manager
Delta Tau Data Systems, Inc.
Reply
#3
(08-18-2011, 09:51 PM)Sina Wrote: andreslobo,

Please post the part number of the base board and CPU. The part numbers usually start with a 603 or 602 number.

Regards,

the main board part number is 602191-103

The daughter board is 602398-100 sn 3941
Reply
#4
andreslobo,

As noted in this post http://forums.deltatau.com/showthread.php?tid=65, in order to change the firmware for 602398 CPU, you have to replace the chip. Please contact Delta Tau sales channels in order to get an EEPROM chip with your desired firmware version.

Regards,
Sina Sattari
Hardware Engineering Manager
Delta Tau Data Systems, Inc.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)