kmtwds Posted July 29, 2011 Share Posted July 29, 2011 Our CNC controller Advantage 900 is with PMAC2-PCI ULTRA-LITE ASSY NO.603726-104, it does not recognize the PCI card suddenly. The software PEWIN32 PRO2 is the version 4.2.5.0. Anyone can instruct me to solve the problem? We look forward to your help. Best regards Wang Dong Sheng Schlumberger Oilfield Equipment (Shanghai) Co., Ltd. Email: dwang14@slb.com Link to comment Share on other sites More sharing options...
steve.milici Posted July 29, 2011 Share Posted July 29, 2011 This could be due to a driver problem. Do you have an integrator for this machine? They should be able to determine what has caused this issue. If you are the integrator you may need to reinstall the drivers from your original installation CD. Link to comment Share on other sites More sharing options...
kmtwds Posted July 29, 2011 Author Share Posted July 29, 2011 This could be due to a driver problem. Do you have an integrator for this machine? They should be able to determine what has caused this issue. If you are the integrator you may need to reinstall the drivers from your original installation CD. Hi Steve, Thank you very much, We don't have an integrator and original installation CD, we brought the machine from the States. Could you send us the driver and instruct us to fix this problem? Best regards Wang Dong Sheng Link to comment Share on other sites More sharing options...
kmtwds Posted July 31, 2011 Author Share Posted July 31, 2011 Hi Steve, I reinstalled the software PMAC Executive Pro2 Suite (version 4.2.11.0) with "repair mode", the problem had been fixed. Thank you for your help and support Wang Dong Sheng Schlumberger Oilfield Equipment (Shanghai) Co., Ltd. Workshop B, Block 3-8, No. 8228, Beiqing Road, Qingpu EPZ Shanghai 201707, China Tel: +86 21 59705518*8127 Fax: +86 21 59702709 Link to comment Share on other sites More sharing options...
Recommended Posts