Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Installing new IDE problems
#1
while trying to install the new IDE I received a meesage from my Vipre anti-virus software that said
"A known bad file was blocked from opening"
"program: projea.rra"

The installer reports
"The following error occurred on the file 'C:\Program Files\Delta Tau Data Systems Inc\2.0\Power PMAC Suite\projpp.sfx.exe'."
"Access is denied."

I disabled my Vipre sw and started the installation again.
During the install I recied a message that said
"Cannot find one or more components. Please reinstall the application"

After clicking on ok the install continued and finished.

When I tried to start the IDE I received th same message again and the app shuts down.

When trying to start my normal VS2008 IDE I received the message
"The file %CommonDir%\dte90a.olb cound not be loaded. An attempt to repair this condition failed because the file could not be found.
Please reinstall this program."

I am running Windows 7.

The IDE install log follows:
Delta Tau Power PMAC Suite Installation Starts....
DATE: 2-14-2011

TIME: 12:54:39
Repairing Installation

Installing on C:\Program Files\Delta Tau Data Systems Inc\2.0



-*** MOVING FILES*** -
Started to move Power PMAC Suite files...
Finished moving Power PMAC Suite files...


-*** DELETEEXPANSIONSXML FILE *** -
Deleteing ExpansionsXML File...
Deleted ExpansionsXML File...



-*** ADDINS *** -
Creating Addins register entry...
Addins register entry created...



-*** SYSTEM ENV PATH (CROSS_COMPILE) SETUP *** -
Creating System ENV Path...
BroadCasting Set Environment Variable (Path)


Finished creating Environment Variables...


-*** SYSTEM VAR PATH (PPSystemRoot) SETUP *** -
Creating System VAR Path...
BroadCasting Set Environment Variable (Path)


Finished creating Environment Variables...


-*** PROJECT TEMPLATES *** -
Installing projet Templates...
Finished installing Project Templates...


-*** ITEM TEMPLATES*** -
Installing Item Templates...
Finish installing Item Templates...


-*** INSTALL POWER PMAC Suite *** -
Creating register entries for project type...
Finished installing Power PMAC Suite.exe /s...


-*** COMPILE PATH ***-
Creating compile path entry...
Complie Path registry entry created...


-*** DATABASE PATH ***-
Creating DataBase path registery entry...
DataBase path registery entry created...



-*** PROJECT PATH*** -
Creating Project path entry...
Finished creating Project Path register entry...


-*** INI STORE PATH *** -
Creating INI Store Path register entry...
Finished creating INI Store Path register entry...


-*** APP PATH *** -
Creating App Path register entry...
Finished creating App Path register entry...


-*** DEFAULT STORE PATH *** -
Creating Default Store Path register entry...
Default Store Path register entry created...


-*** TOOL WINDOW PATH *** -
Creating Tool Window Path...
Finished creating Tool Windows Path...


-*** DEVICE OPTIONS *** -
DeviceOptions register entry started...


-*** MODIFY PROJECTTYPE MSI PATH*** -
Modify Project Type MSI Path...
Finsihed Modifying Prject Type MSI Path...


-*** CYGNUS SOLUTIONS ***-
Creating Cygnus Solutions entries...
Cygnus Solutions register entry created...

Cygwin register entry created...

cygdrive prefix register entry created...

cygdrive flags register entry created...

native register entry created...

flags register entry created...

native register entry created...

flags register entry created...

native register entry created...

flags register entry created...

Program Options register entry created...

Cygnus Solutions register entries created...



-*** INSTALL MYSQL *** -
Checking if MySQL Path register entry exists...


-*** START MySQL SERVICE *** -
Starting MySQL Service...
MYSQL service started...


-*** DELETE OLD POWER PMAC EXAMPLES *** -
Starting to Delete Old Power PMAC Examples...
Completed Deleted old Power PMAC Examples...


-*** CUSTOM WIZARD ***-
Starting to installing Custome Wizard...
Custome Wizard finished installing...



-*** USER CPLC CUSTOM WIZARD *** -
Installing User CPLC Custom Wizard...
Finished installing User CPLC Custom Wizard...


-*** STARTING TO INSTALL MICROSOFT GACUTIL *** -
Installing Microsoft Gacutil...
Microsoft Gacutil Installed...


-*** INSTALL MYSQL TABLES *** -
Creating Install MySQL Tables Path register entry...
Finished Installing MYSQL Tables...


-*** UNZIPPING POWER PMAC PROJECT EXAMPLES *** -
Checking if Power PMAC Project Examples exists...
Installing Power PMAC Project Examples...
Finsihed installing the Power PMAC Project Examples...


-*** UNZIPPING 460 COMPLIER *** -
Checking if 460 complier exists...
460 complier with the same date already exist...
Finsihed installing the 460 Complier...


-*** UNZIPPING DTLIBS *** -
Checking if DTLIBS exists...
Installing the DTLIBS...
Finsihed installing DTLIBS...


-*** UNZIPPING PROJ PP *** -
Installing ProjPP...
Finished installing ProjPP...


-*** RUN AS ADMIN *** -
Run As Admin register entry started...
Run As Admin register entry created...

Run As Admin register entry created...


-*** STARTING TO INSTALL POWER PMAC HELP *** -
Installing POWER PMAC Help...
Power PMAC Help Installed...


-*** Modify Program Provider EXP() *** -
Modify Program Provider EXP() register entry...
Finished Modify Program Provider EXP() Path register entry...
Finished Modify Program Provider EXP() Path register entry...
Finished Modify Program Provider EXP() Path register entry...
Finished Modify Program Provider EXP() Path register entry...


-*** Modify CLSID EXP() *** -
Modify CLSID register entry...
Finished Modify CLSID EXP() Path register entry...
Finished Modify CLSID EXP() Path register entry...
Finished Modify CLSID EXP() Path register entry...
Finished Modify CLSID EXP() Path register entry...


-*** Modify AD7 Metrics() *** -
Modify AD7 Metrics() register entry...
Finished Modify AD7 Metrics register entry...
Finished Modify AD7 Metrics register entry...
Finished Modify AD7 Metrics register entry...
Finished Modify AD7 Metrics register entry...
Finished Modify AD7 Metrics register entry...
Finished Modify AD7 Metrics register entry...
Finished Modify AD7 Metrics register entry...
Finished Modify AD7 Metrics register entry...
Finished Modify AD7 Metrics register entry...

Reply
#2
(02-14-2011, 11:10 AM)JohnR Wrote: while trying to install the new IDE I received a meesage from my Vipre anti-virus software that said
"A known bad file was blocked from opening"
"program: projea.rra"

The installer reports
"The following error occurred on the file 'C:\Program Files\Delta Tau Data Systems Inc\2.0\Power PMAC Suite\projpp.sfx.exe'."
"Access is denied."

I disabled my Vipre sw and started the installation again.
During the install I recied a message that said
"Cannot find one or more components. Please reinstall the application"

After clicking on ok the install continued and finished.

When I tried to start the IDE I received th same message again and the app shuts down.

When trying to start my normal VS2008 IDE I received the message
"The file %CommonDir%\dte90a.olb cound not be loaded. An attempt to repair this condition failed because the file could not be found.
Please reinstall this program."

I am running Windows 7.

The IDE install log follows:
Delta Tau Power PMAC Suite Installation Starts....
DATE: 2-14-2011

TIME: 12:54:39
Repairing Installation

Installing on C:\Program Files\Delta Tau Data Systems Inc\2.0



-*** MOVING FILES*** -
Started to move Power PMAC Suite files...
Finished moving Power PMAC Suite files...


-*** DELETEEXPANSIONSXML FILE *** -
Deleteing ExpansionsXML File...
Deleted ExpansionsXML File...



-*** ADDINS *** -
Creating Addins register entry...
Addins register entry created...



-*** SYSTEM ENV PATH (CROSS_COMPILE) SETUP *** -
Creating System ENV Path...
BroadCasting Set Environment Variable (Path)


Finished creating Environment Variables...


-*** SYSTEM VAR PATH (PPSystemRoot) SETUP *** -
Creating System VAR Path...
BroadCasting Set Environment Variable (Path)


Finished creating Environment Variables...


-*** PROJECT TEMPLATES *** -
Installing projet Templates...
Finished installing Project Templates...


-*** ITEM TEMPLATES*** -
Installing Item Templates...
Finish installing Item Templates...


-*** INSTALL POWER PMAC Suite *** -
Creating register entries for project type...
Finished installing Power PMAC Suite.exe /s...


-*** COMPILE PATH ***-
Creating compile path entry...
Complie Path registry entry created...


-*** DATABASE PATH ***-
Creating DataBase path registery entry...
DataBase path registery entry created...



-*** PROJECT PATH*** -
Creating Project path entry...
Finished creating Project Path register entry...


-*** INI STORE PATH *** -
Creating INI Store Path register entry...
Finished creating INI Store Path register entry...


-*** APP PATH *** -
Creating App Path register entry...
Finished creating App Path register entry...


-*** DEFAULT STORE PATH *** -
Creating Default Store Path register entry...
Default Store Path register entry created...


-*** TOOL WINDOW PATH *** -
Creating Tool Window Path...
Finished creating Tool Windows Path...


-*** DEVICE OPTIONS *** -
DeviceOptions register entry started...


-*** MODIFY PROJECTTYPE MSI PATH*** -
Modify Project Type MSI Path...
Finsihed Modifying Prject Type MSI Path...


-*** CYGNUS SOLUTIONS ***-
Creating Cygnus Solutions entries...
Cygnus Solutions register entry created...

Cygwin register entry created...

cygdrive prefix register entry created...

cygdrive flags register entry created...

native register entry created...

flags register entry created...

native register entry created...

flags register entry created...

native register entry created...

flags register entry created...

Program Options register entry created...

Cygnus Solutions register entries created...



-*** INSTALL MYSQL *** -
Checking if MySQL Path register entry exists...


-*** START MySQL SERVICE *** -
Starting MySQL Service...
MYSQL service started...


-*** DELETE OLD POWER PMAC EXAMPLES *** -
Starting to Delete Old Power PMAC Examples...
Completed Deleted old Power PMAC Examples...


-*** CUSTOM WIZARD ***-
Starting to installing Custome Wizard...
Custome Wizard finished installing...



-*** USER CPLC CUSTOM WIZARD *** -
Installing User CPLC Custom Wizard...
Finished installing User CPLC Custom Wizard...


-*** STARTING TO INSTALL MICROSOFT GACUTIL *** -
Installing Microsoft Gacutil...
Microsoft Gacutil Installed...


-*** INSTALL MYSQL TABLES *** -
Creating Install MySQL Tables Path register entry...
Finished Installing MYSQL Tables...


-*** UNZIPPING POWER PMAC PROJECT EXAMPLES *** -
Checking if Power PMAC Project Examples exists...
Installing Power PMAC Project Examples...
Finsihed installing the Power PMAC Project Examples...


-*** UNZIPPING 460 COMPLIER *** -
Checking if 460 complier exists...
460 complier with the same date already exist...
Finsihed installing the 460 Complier...


-*** UNZIPPING DTLIBS *** -
Checking if DTLIBS exists...
Installing the DTLIBS...
Finsihed installing DTLIBS...


-*** UNZIPPING PROJ PP *** -
Installing ProjPP...
Finished installing ProjPP...


-*** RUN AS ADMIN *** -
Run As Admin register entry started...
Run As Admin register entry created...

Run As Admin register entry created...


-*** STARTING TO INSTALL POWER PMAC HELP *** -
Installing POWER PMAC Help...
Power PMAC Help Installed...


-*** Modify Program Provider EXP() *** -
Modify Program Provider EXP() register entry...
Finished Modify Program Provider EXP() Path register entry...
Finished Modify Program Provider EXP() Path register entry...
Finished Modify Program Provider EXP() Path register entry...
Finished Modify Program Provider EXP() Path register entry...


-*** Modify CLSID EXP() *** -
Modify CLSID register entry...
Finished Modify CLSID EXP() Path register entry...
Finished Modify CLSID EXP() Path register entry...
Finished Modify CLSID EXP() Path register entry...
Finished Modify CLSID EXP() Path register entry...


-*** Modify AD7 Metrics() *** -
Modify AD7 Metrics() register entry...
Finished Modify AD7 Metrics register entry...
Finished Modify AD7 Metrics register entry...
Finished Modify AD7 Metrics register entry...
Finished Modify AD7 Metrics register entry...
Finished Modify AD7 Metrics register entry...
Finished Modify AD7 Metrics register entry...
Finished Modify AD7 Metrics register entry...
Finished Modify AD7 Metrics register entry...
Finished Modify AD7 Metrics register entry...
You may want to try to download the installtion from FTP and try to repair it and if that did not work then uninstall and reinstall.
I am sure you are the Administrator and also try to install by right click and then select run as admin!
Thanks,
Atul
Reply
#3
(02-14-2011, 11:26 AM)agovande Wrote:
(02-14-2011, 11:10 AM)JohnR Wrote: while trying to install the new IDE I received a meesage from my Vipre anti-virus software that said
"A known bad file was blocked from opening"
"program: projea.rra"

The installer reports
"The following error occurred on the file 'C:\Program Files\Delta Tau Data Systems Inc\2.0\Power PMAC Suite\projpp.sfx.exe'."
"Access is denied."

I disabled my Vipre sw and started the installation again.
During the install I recied a message that said
"Cannot find one or more components. Please reinstall the application"

After clicking on ok the install continued and finished.

When I tried to start the IDE I received th same message again and the app shuts down.

When trying to start my normal VS2008 IDE I received the message
"The file %CommonDir%\dte90a.olb cound not be loaded. An attempt to repair this condition failed because the file could not be found.
Please reinstall this program."

I am running Windows 7.

The IDE install log follows:
Delta Tau Power PMAC Suite Installation Starts....
DATE: 2-14-2011

TIME: 12:54:39
Repairing Installation

Installing on C:\Program Files\Delta Tau Data Systems Inc\2.0



-*** MOVING FILES*** -
Started to move Power PMAC Suite files...
Finished moving Power PMAC Suite files...


-*** DELETEEXPANSIONSXML FILE *** -
Deleteing ExpansionsXML File...
Deleted ExpansionsXML File...



-*** ADDINS *** -
Creating Addins register entry...
Addins register entry created...



-*** SYSTEM ENV PATH (CROSS_COMPILE) SETUP *** -
Creating System ENV Path...
BroadCasting Set Environment Variable (Path)


Finished creating Environment Variables...


-*** SYSTEM VAR PATH (PPSystemRoot) SETUP *** -
Creating System VAR Path...
BroadCasting Set Environment Variable (Path)


Finished creating Environment Variables...


-*** PROJECT TEMPLATES *** -
Installing projet Templates...
Finished installing Project Templates...


-*** ITEM TEMPLATES*** -
Installing Item Templates...
Finish installing Item Templates...


-*** INSTALL POWER PMAC Suite *** -
Creating register entries for project type...
Finished installing Power PMAC Suite.exe /s...


-*** COMPILE PATH ***-
Creating compile path entry...
Complie Path registry entry created...


-*** DATABASE PATH ***-
Creating DataBase path registery entry...
DataBase path registery entry created...



-*** PROJECT PATH*** -
Creating Project path entry...
Finished creating Project Path register entry...


-*** INI STORE PATH *** -
Creating INI Store Path register entry...
Finished creating INI Store Path register entry...


-*** APP PATH *** -
Creating App Path register entry...
Finished creating App Path register entry...


-*** DEFAULT STORE PATH *** -
Creating Default Store Path register entry...
Default Store Path register entry created...


-*** TOOL WINDOW PATH *** -
Creating Tool Window Path...
Finished creating Tool Windows Path...


-*** DEVICE OPTIONS *** -
DeviceOptions register entry started...


-*** MODIFY PROJECTTYPE MSI PATH*** -
Modify Project Type MSI Path...
Finsihed Modifying Prject Type MSI Path...


-*** CYGNUS SOLUTIONS ***-
Creating Cygnus Solutions entries...
Cygnus Solutions register entry created...

Cygwin register entry created...

cygdrive prefix register entry created...

cygdrive flags register entry created...

native register entry created...

flags register entry created...

native register entry created...

flags register entry created...

native register entry created...

flags register entry created...

Program Options register entry created...

Cygnus Solutions register entries created...



-*** INSTALL MYSQL *** -
Checking if MySQL Path register entry exists...


-*** START MySQL SERVICE *** -
Starting MySQL Service...
MYSQL service started...


-*** DELETE OLD POWER PMAC EXAMPLES *** -
Starting to Delete Old Power PMAC Examples...
Completed Deleted old Power PMAC Examples...


-*** CUSTOM WIZARD ***-
Starting to installing Custome Wizard...
Custome Wizard finished installing...



-*** USER CPLC CUSTOM WIZARD *** -
Installing User CPLC Custom Wizard...
Finished installing User CPLC Custom Wizard...


-*** STARTING TO INSTALL MICROSOFT GACUTIL *** -
Installing Microsoft Gacutil...
Microsoft Gacutil Installed...


-*** INSTALL MYSQL TABLES *** -
Creating Install MySQL Tables Path register entry...
Finished Installing MYSQL Tables...


-*** UNZIPPING POWER PMAC PROJECT EXAMPLES *** -
Checking if Power PMAC Project Examples exists...
Installing Power PMAC Project Examples...
Finsihed installing the Power PMAC Project Examples...


-*** UNZIPPING 460 COMPLIER *** -
Checking if 460 complier exists...
460 complier with the same date already exist...
Finsihed installing the 460 Complier...


-*** UNZIPPING DTLIBS *** -
Checking if DTLIBS exists...
Installing the DTLIBS...
Finsihed installing DTLIBS...


-*** UNZIPPING PROJ PP *** -
Installing ProjPP...
Finished installing ProjPP...


-*** RUN AS ADMIN *** -
Run As Admin register entry started...
Run As Admin register entry created...

Run As Admin register entry created...


-*** STARTING TO INSTALL POWER PMAC HELP *** -
Installing POWER PMAC Help...
Power PMAC Help Installed...


-*** Modify Program Provider EXP() *** -
Modify Program Provider EXP() register entry...
Finished Modify Program Provider EXP() Path register entry...
Finished Modify Program Provider EXP() Path register entry...
Finished Modify Program Provider EXP() Path register entry...
Finished Modify Program Provider EXP() Path register entry...


-*** Modify CLSID EXP() *** -
Modify CLSID register entry...
Finished Modify CLSID EXP() Path register entry...
Finished Modify CLSID EXP() Path register entry...
Finished Modify CLSID EXP() Path register entry...
Finished Modify CLSID EXP() Path register entry...


-*** Modify AD7 Metrics() *** -
Modify AD7 Metrics() register entry...
Finished Modify AD7 Metrics register entry...
Finished Modify AD7 Metrics register entry...
Finished Modify AD7 Metrics register entry...
Finished Modify AD7 Metrics register entry...
Finished Modify AD7 Metrics register entry...
Finished Modify AD7 Metrics register entry...
Finished Modify AD7 Metrics register entry...
Finished Modify AD7 Metrics register entry...
Finished Modify AD7 Metrics register entry...
You may want to try to download the installtion from FTP and try to repair it and if that did not work then uninstall and reinstall.
I am sure you are the Administrator and also try to install by right click and then select run as admin!
Thanks,
Atul

Thank Atul,

I have tried your suggestions and still have the same problem.

I did the following:
unistalled PPMAC IDE
unistalled VS2008
installed PPMAC IDE -> tried to run and failed
installed VS2008 -> received error "The file %CommonDir%\dte90a.olb cound not be loaded. An attempt to repair this condition failed because the file could not be found.
Please reinstall this program."

Please note that I see microsoft updated for VS2008 have been installed as of 2/14/2011,might this effect the IDE ?

I have tried may different permutations of the above and have had no success.

Thanks
John
Reply
#4
I also saw the vipre message, but my IDE appeared to have installed correctly. Just a note.
Reply
#5
Just recently saw a problem - during install Norton quaranteed the ppmac IDE .exe file. The symptom was that when you tried to start up the IDE you got a message saying that the shortcut was broken because the file had been moved.

Solution was to shut off Norton, uninstall, and then reinstall. After that no problems.

Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)