Bryan2112 Posted August 19, 2021 Share Posted August 19, 2021 Hi folks, I've recently added some new equipment to a Z-Axis as part of an upgrade. This has added a fair bit of weight to the axis and the motor isn't coping too well as a result. There is another machine on site ( a Fanuc), that uses air assist which works really well, so, i'd like to try the same approach on the affected machine. Controller is a Turbo Pmac2 in a UMAC configuration. I've configured a spare output (M7135) and tested it ok. Could someone provide me with a code example on how to fire this output? Output to energise an air solenoid. Basically what is required is, once a counter-clockwise movement of the motor is detected, M7135 needs to go high. Motor is #3 in the system. Many thanks. Bryan Link to comment Share on other sites More sharing options...
Recommended Posts