01-13-2021, 05:35 PM
(This post was last modified: 01-13-2021, 05:56 PM by Eric Hotchkiss.)
In some cases customers may not be able to connect to quad core PMAC through the USB-Serial UART Diagnostic Port over a Micro-USB cable. In this case, after pressing the button to put the port into serial mode, the CPU appears in the device manager as "FX230X Basic UART" instead of receiving a COM port.
To fix this issue, install the appropriate version of this driver. (Windows 32 or 64 bit)
https://www.ftdichip.com/Drivers/D2XX.htm
To fix this issue, install the appropriate version of this driver. (Windows 32 or 64 bit)
https://www.ftdichip.com/Drivers/D2XX.htm