Eric Hotchkiss Posted January 14, 2021 Share Posted January 14, 2021 In some cases customers may not be able to connect to Power PMAC ARM through the USB-Serial UART Diagnostic Port over a Micro-USB cable. In this case, after pressing the button to put the port into serial mode, the CPU appears in the device manager as "FX230X Basic UART" instead of receiving a COM port. To fix this issue, install the appropriate version of this driver. (Windows 32 or 64 bit) https://www.ftdichip.com/Drivers/D2XX.htm Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.