Jump to content
OMRON Forums

about Error07 buffer in use with binary rot buf.


wonjae lee

Recommended Posts

Hello.

 

I'm trying to use bin rot buf.

 

i use vs2010 and PmacSuiteSetup 7.11.86

 

i run bin rot buffer and gather data using by PEWIN32.

 

after gathering data.

 

bin rot buffer says buff is full and not moving.

 

i aborted bin rot buffer.

 

after that.

 

i have an error in buffer change.

 

my coode is

if ( DeviceDPRRotBufChange(m_dwDeviceID, 0, m_nBuff_Size)<0 )

{

MessageBox(_T("Binary Rotary Buffer Size Changing Error!"));

return;

}

 

i've got this error message always after that.

 

 

and i tried to clear in terminal (which is in the pe win32pro)\

 

but there is error message

 

error07 buffer is already in use.

 

i type close several times. and type clr again

 

error is same.

 

what did i do wrong.

 

any advise.

 

thanks.

Link to comment
Share on other sites

  • 4 weeks later...
  • Replies 1
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

This would be a technical support issue.

Please contact ODT's technical support at:

ODT-Support@omron.com

 

Note that “clr” is not a valid PMAC command. If you wish to clear the terminal screen, please use the “Clear Terminal” selection from the Terminal right-mouse click menu.

 

We cannot directly comment on user C-code but we can answer questions about PcommServer library functions. I don’t believe you can change the binary rotary buffer size “on-the-fly”.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.

×
×
  • Create New...