06-07-2020, 07:07 PM
How to check the completion of string command
for example, 'sendallcmds' or 'Ldata.CmdStatus' in powerpmac
for example, 'sendallcmds' or 'Ldata.CmdStatus' in powerpmac
How to check the completion of string command
|
06-07-2020, 07:07 PM
How to check the completion of string command
for example, 'sendallcmds' or 'Ldata.CmdStatus' in powerpmac
06-15-2020, 04:45 PM
Turbo PMAC does not have an equivalent feature.
You might try setting a flag at the end of your command string. This would at least verify it was received by PMAC.
06-22-2020, 05:39 PM
Thanks for the reply.
I know what to do. I will test 'Command"#1j:1000 P1000=1" |
« Next Oldest | Next Newest »
|