jchan Posted February 25, 2020 Share Posted February 25, 2020 Hi, I have a 460CPU PMAC rack, I have been using this successfully over the last few months. However, I have been adding more C-code, motion programs, CPLCs, etc. to it. Recently, it has been unable to save the latest code and variables. And upon power up, I have had to download the project back onto it again. When I do a save command on the terminal, I get the following message (shortened): " cp: cannot create directory `/opt/ppmac/usrflash/Project/System': Read-only file system .... (more lines of the similar affect) cp: cannot create regular file `/opt/ppmac/usrflash/Database/pp_prog.sym': Read-only file system cp: cannot create regular file `/opt/ppmac/usrflash/Database/pp_subprog.sym': Read-only file system Successful: SaveConfiguration using /var/ftp/usrflash/Project/Configuration/pp_save.cfg Successful: SaveCustomConfiguration using template /var/ftp/usrflash/Project/Configuration/pp_custom_save.tpl Saving To Flash: Please do NOT Power off until Finished!!! Available disk space = 175096K 6960K Required disk space = 6960K Saving To Flash: Copying files to flash Saving To Flash: Syncing files to flash Saving To Flash: Mounting the flash Saving To Flash: Finished SAVING to flash Save Completed" Is this indicating that I am unable to load the project onto the PMAC as it is read-only? Am I missing some sort of permission that makes the project on the PMAC read-only? Are there any suggestions on how to fix this issue? Many thanks in advance. Link to comment Share on other sites More sharing options...
steve.milici Posted February 26, 2020 Share Posted February 26, 2020 Execute a "save" command in a "gpascii" SSH window and send the complete response to ODT-Support@omron.com. Link to comment Share on other sites More sharing options...
Recommended Posts