hannsx Posted May 21, 2019 Share Posted May 21, 2019 Hi, I am dealing with a PowerBrickLV and in the documentation for the encoder setup it says "Halls T" for primary use on pin 14. When I look into the User Manual however there is no mentioning of Channel T and there is no mentioning elsewhere in the Manuals. What ist Halls T for? Best regards, hannsx Link to comment Share on other sites More sharing options...
curtwilson Posted May 21, 2019 Share Posted May 21, 2019 There is no specific use for it as an input. The T, U, V, and W input pins are also used for differential pulse and direction outputs, so there are 4 pins available. The most common input use is as a digital overtemperature signal. Link to comment Share on other sites More sharing options...
hannsx Posted May 27, 2019 Author Share Posted May 27, 2019 Ok, thanks for clarifying that! Link to comment Share on other sites More sharing options...
Recommended Posts