Jump to content
OMRON Forums

EtherCAT capture


DaveBarnett

Recommended Posts

The screen capture attached here was from traffic between my CK3E and several ECAT servo drives, everything working normally, and with clock rate of 1KHz. I see the broadcast packets at the 1 KHz rate (0.0009999 delta) ...but can anyone tell me what the less frequent packets of length 64 are ?

 

Thanks !

Capture1.thumb.png.0f70a49e9d49588906d0bb33c137985d.png

Link to comment
Share on other sites

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Hi Dave,

 

It does look like the size 64 packets have a period of 10 ms. It's possible that they are from SDOs called either in a PLC or the watch window (if you lowered the default period). Maybe you have a 10 ms timer in a PLC. Try disabling PLCs are seeing if it goes away.

 

It is also possible that they could be from transfers to devices in freerun mode. Is this all Elmo drives or do you have any IO devices in your network?

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.

×
×
  • Create New...