04-24-2019, 04:06 AM
Dear ALl,
We have a new project where we need to actuate a PZT actuator with openloop command ( 0 to 10V). We need to use the amplifier 3 for the output. Can you provide any steps to follow to test the actuator?
Thank you.
Regards,
Raghav
We have a new project where we need to actuate a PZT actuator with openloop command ( 0 to 10V). We need to use the amplifier 3 for the output. Can you provide any steps to follow to test the actuator?
Thank you.
Regards,
Raghav