Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[SOLVED]Tuning not working
#1
Hi all,
I have a problem with the tune tool.
As soon as I open it I get no values in the gains and an error in the error window saying "Exception Input string was not in a correct format."

I tried changing different things and also disabling all the motors but it looks like the tool is asking for some non-motor related parameters that give a imporperly formatted reply.

If I make $$$*** I see gains again

Tried some compare with other projects but no luck in understanding. What could be wrong?


Attached Files Image(s)
   
Reply
#2
This would be a technical support issue.
Please contact ODT's technical support at:
support@deltatau.com
Reply
#3
After some help from european technical support the problem was identified (there were some kinematic variables definitions using reserved names) and fixed.
Reply
#4
(05-05-2019, 11:27 PM)tecnico Wrote: After some help from european technical support the problem was identified (there were some kinematic variables definitions using reserved names) and fixed.

Thank You for the follow up. Closure is helpful.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)