Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Firmware update in sequence?
#1
Some of our original machines in the field are still at FW rev 1.6.1. We are currently at 2.1.1.3 for our production systems. How necessary is it to upgrade to each and every firmware revision in between? Is there a way to do this with a single USB boot stick?
Reply
#2
You can go directly from any 1.6.x to 2.1.1.3 without issue.

You can do this on a USB stick. This is detailed in the following Forums post (in Important Threads):
Is there a re-initialization jumper for Power PMAC? (E3?)
http://forums.deltatau.com/showthread.php?tid=572

See the latest version of the 4.x “Power PMAC IDE USER MANUAL” for a compatibility chart of firmware and IDE versions.
Reply
#3
(02-01-2019, 04:50 PM)steve.milici Wrote: See the latest version of the 4.x “Power PMAC IDE USER MANUAL” for a compatibility chart of firmware and IDE versions.

Where is the 4.x manual?
Reply
#4
This manual is part of the installation. You can access it from the "Help" menu.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)