Jump to content
OMRON Forums

IDE4 - DisplayOrder


AnthonyLH

Recommended Posts

Dear all,

On the IDE 4, the scripts files I add or insert are not ordered alphabetically.

It cause variables mapping desorder (between variables in the script (plc/prog) and variables interrogation through gpascii).

 

Comparing IDE3 and IDE4 project files I found this new tag: 2

 

How can i remove this option ?

 

Thanks

Link to comment
Share on other sites

  • Replies 5
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  • 2 weeks later...
The IDE will download the files in the order they appear in the project manager (with respect to a specific folder). In previous versions, this was always alphabetical, and there was no choice. We had managed this by using prefixes before each file (typically numbering them--"01-", "02-", etc.). As Tony noted, as of IDE 4, this is no longer required, as you can now manually re-order the files and therefore the order in which they download.
Link to comment
Share on other sites

Thanks,

so starting at ID4 the script files are not ordered alphabetically.

 

My issue then might be the mapping done for the C code ("pp_proj.h") which seems to still map using alphabet order.

 

Please have a look at the attachment. Mapping for C and Script seems different (look at P_01 and P_02:

P_01 is P8193 in Script, but is mapped has P8192 in pp_proj.h

217309870_Mappingissue.png.da36f52b039929efecfc2e137ff80b4c.png

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.

×
×
  • Create New...