Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
CK3E Firmware Download MIA AND ALL 2.4.1.x Firmware download links MIA
#1
ISSUE 1)

Based on README firmware descriptions and given that I have a CK3E unit, one would think that I need to download:

powerpmacARM_Posix .. Omron uPower PMAC (CK3E Acontis EtherCAT)

but in FILEDEPOT we have all sorts of inconsistent nomenclature except never powerpmacARM_POSIX, so what exactly do I download for a CK3E unit? There is a powerpmacARM download - is that the right one?

Here is what README says:

Firmware Descriptions

powerpmac460ex ...... Power UMAC 460 CPU and Power Brick
powerpmac465 ........ Power UMAC/CPCI/Clipper 465 CPU
powerpmacARM ........ Power UMAC ARM (hardware not yet released)
powerpmacARM_Posix .. Omron uPower PMAC (CK3E Acontis EtherCAT)
powerpmacWIN_Posix .. Omron IPC Windows (NY51[]-A Acontis EtherCAT)
powerpmacX86_Posix .. Omron IPC Linux (Acontis EtherCAT)

Please see the "Release Notes" folder for firmware update information.

ISSUE 2)

Where are the links for version 2.4.1.x or 2.4.1.2 firmware download? See attached screenshot.


Attached Files Image(s)
   
Reply
#2
All firmware files for the CK3E/CK3M have been removed from the Forums' FileDepot.

Please contact support@deltatau.com to discuss why you need to upgrade firmware. By phone call 800-556-6766. Select "1" for Technical Support. Then select "4" for Omron Delta Tau.
Reply
#3
Thank you Steve,
On Deltatau website there is only one IDE, the IDE 4.2.0.13.
Can this IDE be used with all PPMAC products? CK3E (ARM_Posix), PowerBricks (460ex) , PowerClippers (apm866xx)...
Reply
#4
(12-13-2018, 01:28 AM)AnthonyLH Wrote: Thank you Steve,
On Deltatau website there is only one IDE, the IDE 4.2.0.13.
Can this IDE be used with all PPMAC products? CK3E (ARM_Posix), PowerBricks (460ex) , PowerClippers (apm866xx)...

Yes - this is for all Power PMACs.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)