11-20-2018, 01:04 PM

In the users manual an example is given of defining an array:

global IncrementDist(512);

and then doing

MyTotalDist = sum(&IncrementDist, 512, 1)

to get the sum.

I'm trying to do this but getting the error:

Error : ( error #31) data error in equation : Q1045 = sum(&IncrementDist, 512, 1)

This seems to happen regardless of where I place the line or what variable it's assigning to. I am using IDE version 4.1.0.24 and firmware version 2.4.0.180.

global IncrementDist(512);

and then doing

MyTotalDist = sum(&IncrementDist, 512, 1)

to get the sum.

I'm trying to do this but getting the error:

Error : ( error #31) data error in equation : Q1045 = sum(&IncrementDist, 512, 1)

This seems to happen regardless of where I place the line or what variable it's assigning to. I am using IDE version 4.1.0.24 and firmware version 2.4.0.180.