GeoMACRO BiSS-C encoder support

[wlewis]

Is there an option available for BiSS-C encoder support on the GeoMACRO drive?

[Gregs]

No Biss C. These are the current options:

Feedback Options
0 = No options, Default; Standard feedback
per axis is quadrature differential
encoder with hall effect inputs or SSI
absolute encoder .
1 = Analog Feedback including :
• Option 0 Standard Feedback
• 4096x Sin/Cos interpolator
• Resolver Interface
2 = Absolute Feedback including :
• Option 1 Analog Feedback
• Endat™
• Hiperface™

However, a Biss C option is not unlikely in the future.