MDustan Posted July 16, 2018 Share Posted July 16, 2018 I have a project that worked correctly on IDE 2 I am now trying to download it to my CK3E which I have upgraded to firmware 2.4.1.2. I believe I need IDE 4 with this flavour of Firmware, I am very keen to test out the new features delivered with this software firmware combination. Having installed the IDE and configured the EtherCAT network from within the IDE, which is a nice feature, I went to download my project. It builds with no errors but on download I get the following error: Error : ( Preprocessing Error) GPG file size exceeded : on string ("") Could someone shed a little more light on this error? Is there a fundamental change between the IDE's that would cause this error? Link to comment Share on other sites More sharing options...
steve.milici Posted July 17, 2018 Share Posted July 17, 2018 Try the latest version of the IDE on the ODT website (4.0.3.0): http://www.deltatau.com/DT_Products/SoftwareDevelopment.aspx This may correct the issue. Link to comment Share on other sites More sharing options...
MDustan Posted July 18, 2018 Author Share Posted July 18, 2018 Try the latest version of the IDE on the ODT website (4.0.3.0): http://www.deltatau.com/DT_Products/SoftwareDevelopment.aspx This may correct the issue. Hi Steve, I installed the patch, this had the effect of moving the same error further down the list of our script files. I guess the GPG file size limit was increased in the patch any chance this limit could be opened up further by a significant amount? Link to comment Share on other sites More sharing options...
Recommended Posts