Jump to content
OMRON Forums

RESOLVED - VirtualBox not working with IDE


hannsx

Recommended Posts

Hi, I want to share my problems and solution for other people to benefit of it.

 

The File ist not available on the File depot, so you have to specifically

ask the support for the newest File. In my case I got the Files from my

supervisor and that did not work.

 

Problem: I was not able to connect to the MotionCore.VBox Machine with my PMac IDE.

Solution: Use the newest MotionCore.Zip file.

 

The File ist not available on the File depot, so you have to specifically

ask the support for the newest File. In my case I got the Files from my

supervisor to start with and that did not work.

Link to comment
Share on other sites

  • 1 year later...
  • Replies 2
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I encountered a similar issue and I got an error from IDE

 

also, I succeed to connect with ssh but when I try to run "gpascii" or "sendgetsends" i get the following error:

 

rtpmac open, Err Msg: (No such device or address)

Segmentation fault

 

I attached photos to this post to demonstrate to errors I got

 

I wonder if you encountered a similar issue to what I described in this post?

 

 

also I saw that there are two versions of MotionCore.zip files on the fieldepot:

 

MotionCore.zip old version:

ftp://ftp.deltatau.ch/Virtual-PowerPMAC-pack/OLD/MotionCore.zip

 

MotionCore.zip latest version

ftp://ftp.deltatau.ch/Virtual-PowerPMAC-pack/MotionCore.zip

 

I tried both and failed, did you tried both?

 

Host OS : Ubuntu 16.04

VM SW: VirtualBox 6.0.6

IDE 4.1.0.24 running on Virtual Machine of Win10

 

Thank you,

Or Hirshfeld

SW Control Engineer

FFRobotics

https://www.linkedin.com/in/orhirshfeld/

image.png.4f2a43585229a4b413fc54cf16e1f67e.png

1947949627_errorsshconnectingtopmacandrunninggpasciiorsendgetsends.png.c88b13d70066254e0dc4d23d4d57c669.png

Link to comment
Share on other sites

Hi hannnsx and orhirshfeld

 

probably your license for the virtual MotionCore is expired. You have to ask for a new one sending a request to:

 

fmacaluso@deltatau.ch

 

Hi, I want to share my problems and solution for other people to benefit of it.

 

The File ist not available on the File depot, so you have to specifically

ask the support for the newest File. In my case I got the Files from my

supervisor and that did not work.

 

Problem: I was not able to connect to the MotionCore.VBox Machine with my PMac IDE.

Solution: Use the newest MotionCore.Zip file.

 

The File ist not available on the File depot, so you have to specifically

ask the support for the newest File. In my case I got the Files from my

supervisor to start with and that did not work.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.

×
×
  • Create New...