2kingbee Posted November 27, 2017 Share Posted November 27, 2017 Hello Is it OK to change the options of the ACC-24E3 as follows Original option -3U-Format Base Board( Original ) -Digital Feedback Mezzanine Board( Original ) -Analog Amplifier-Interface Mezzanine Board( Original ) Changed options -3U-Format Base Board( Original ) -Analog Feedback Mezzanine Board ( Change ) -Digital Amplifier-Interface Mezzanine Board ( Change ) I changed the mezzanine board without changing the baseboard. Link to comment Share on other sites More sharing options...
Eric Hotchkiss Posted November 27, 2017 Share Posted November 27, 2017 Are you saying you swapped out the mezzanine boards yourself or you want to buy a version with different mezzanine boards? Link to comment Share on other sites More sharing options...
Gregs Posted November 27, 2017 Share Posted November 27, 2017 If it plugs in, it will work. Connectors were changed a couple years back, so there could be connector incompatibility between revisions. Also, there could be some jumpers that need to be changed, which will be described in the ACC-24E3 hardware ref manual. Link to comment Share on other sites More sharing options...
Recommended Posts