Virtual Motor Setup Problem

Hi,

I am using "Equidistant Pulse Output Per Traveled Distance Along the Path" example from "LASER PULSE CONTROL WITH POWER PMAC DSPGATE3" document.

I have replaced virtual motor setup parameters with these parameters

Motor[6].InvAmax=1

Motor[6].MaxSpeed=1000

EncTable[6].type=1

EncTable[6].index1=0

EncTable[6].index2=0

EncTable[6].index3=0

EncTable[6].index4=0

EncTable[6].index5=0

EncTable[6].pEnc1=Sys.udata[16].a

EncTable[6].pEnc=Sys.udata[16].a

EncTable[6].MaxDelta=0

EncTable[6].ScaleFactor=1

EncTable[6].TanHalfPhi=0

EncTable[6].CoverSerror=0

Motor[6].pDac=sys.udata[16].a

Motor[6].Ctrl=sys.PosCtrl

//Motor[8].Ctrl=UserAlgo.ServoCtrlAddr[8]

Motor[6].ServoCtrl=1

Motor[6].FatalFeLimit=0

Motor[6].pAmpFault=0

Motor[6].pAmpEnable=0

Motor[6].pLimits=0

Motor[6].PosSf=1

Motor[6].Pos2Sf=1

Motor[6].Servo.Kvfb=0

Motor[5] -> Is used for User-Written-Servo cal running and the remaining setup as given in the document. I can see pulses on Motor[10].

Why it's outputting on Motor[10] even thought I haven't defined it anywhere in my project files?

What needs to be done in order to change Virtual Motor[10] -> Motor[x]?

How can I output these pulses on power clipper?

Regards

Siva

This is a technical support issue.

Please contact our Technical Support Group at support@deltatau.com with details of your issue.