cmcdonald Posted January 24, 2017 Share Posted January 24, 2017 If I am not commutating can the UVW inputs (J7 MMACH3)be used for general purpose input? I'm using a Turbo Clipper. Thanks Chris Link to comment Share on other sites More sharing options...
Richard Naddaf Posted January 24, 2017 Share Posted January 24, 2017 Hall sensors are typically used for power-on absolute phase position. Occasionally, they are used for on-going phase position as well (low resolution feedback). So, if you are not commutating, yes, you should be able to use the UVWT as general purpose inputs. Link to comment Share on other sites More sharing options...
cmcdonald Posted January 24, 2017 Author Share Posted January 24, 2017 Hall sensors are typically used for power-on absolute phase position. Occasionally, they are used for on-going phase position as well (low resolution feedback). So, if you are not commutating, yes, you should be able to use the UVWT as general purpose inputs. Thanks. Chris Link to comment Share on other sites More sharing options...
Recommended Posts