Jump to content
OMRON Forums

No channels in "System setup" (Power Pmac IDE, Power clipper)


RomanSolonto

Recommended Posts

  • 2 weeks later...
  • Replies 8
  • Created
  • Last Reply

Top Posters In This Topic

System setup functions for the Power Clipper are currently under development. At this time use the setup code provided in the "Power PMAC Clipper User Manual" on the Forums' FileDepot:

"http://forums.deltatau.com/filedepot/download.php?f=Power PMAC/Manuals/Hardware Reference Manual/Power PMAC Clipper User Manual.pdf"

Link to comment
Share on other sites

I have 2 Clippers. The problems are simmilar.

 

first:

Gate3[0].PartType 618089

Gate3[0].PartOpt0 $ffffffff

Gate3[0].PartRev 15

Gate3[0].PartType 15

barcode C000FR2A

 

second:

Gate3[0].PartType 618089

Gate3[0].PartOpt0 $ffffffff

Gate3[0].PartRev 15

Gate3[0].PartType 15

barcode C000GJ2Z

Link to comment
Share on other sites

  • 10 months later...

Hi,

 

i have the same problem, and when ask for the information , the PMAC response:

 

Gate3[0].PartType 0

Gate3[0].PartOpt0 nan

Gate3[0].PartRev nan

Gate3[0].PartType nan

 

and if answer with Clipper[0]

 

Clipper[0].PartType nan

Clipper[0].PartOpt0 nan

Clipper[0].PartRev nan

Clipper[0].PartType nan

 

------------

 

for the motor setup, i create a .cfg file in the configuration folder and put the setup code, but when i ask for some configuration variable the value are different that i setup in the file.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.

×
×
  • Create New...