terrydeltasigmacorp.com Posted January 4, 2017 Share Posted January 4, 2017 Where can I find information on the mating connector for the MDR connector on an ACC14-E IO card? Thanks Link to comment Share on other sites More sharing options...
Eric Hotchkiss Posted January 5, 2017 Share Posted January 5, 2017 The ACC14E User Manual can be found here. http://www.deltatau.com/manuals/pdfs/ACC-14E.pdf?id=635787783275025375 Other manuals not found on the forum file depot can be found here. http://www.deltatau.com/manuals/ If you're looking for the pinouts, they start on page 56 according to the pdf, or 50 according to the page numbers. Link to comment Share on other sites More sharing options...
terrydeltasigmacorp.com Posted January 18, 2017 Author Share Posted January 18, 2017 The ACC14E User Manual can be found here. http://www.deltatau.com/manuals/pdfs/ACC-14E.pdf?id=635787783275025375 Other manuals not found on the forum file depot can be found here. http://www.deltatau.com/manuals/ If you're looking for the pinouts, they start on page 56 according to the pdf, or 50 according to the page numbers. What I'm really looking for would be a part number of a connector that would physically plug into this connector. I can't seem to find one that fits. I have tried several 50 Pin MDR cables but all of them are too big to fit into the slot on the card. The shells on all the ones I have found are too big. Link to comment Share on other sites More sharing options...
Alex Anikstein Posted January 19, 2017 Share Posted January 19, 2017 Terry, I believe the exact part number that we use is 3M's 10250-1210PE. Two mating connectors would be 10150-3000PE (Shielded Solder Cup) and 10150-6000EC (Shielded IDC). Link to comment Share on other sites More sharing options...
Recommended Posts