d.manzenberger Posted August 8, 2016 Share Posted August 8, 2016 I was working with software limits, so I went digging through the Power PMAC Software Reference Manual, and under Motor[x].MaxPos, where it says: "Refer to the section on software position limits in the User’s Manual chapter Making Your Application Safe<\i>." So I went to the Power Brick LV User Manual, and there is no such chapter. Any insights? Link to comment Share on other sites More sharing options...
Alex Anikstein Posted August 8, 2016 Share Posted August 8, 2016 That chapter is in the "Power PMAC Users Manual", not any particular hardware User Manual. The name has changed a bit (It is now "Making your Power PMAC Application Safe"), but it begins on p. 388 of the most recent version. http://forums.deltatau.com/filedepot/download.php?f=Power%20PMAC/Manuals/Power%20PMAC%20Users%20Manual.pdf [FILE REMOVED] Link to comment Share on other sites More sharing options...
d.manzenberger Posted August 8, 2016 Author Share Posted August 8, 2016 Gotcha. Thank you for the quick reply! Link to comment Share on other sites More sharing options...
Recommended Posts