06-29-2016, 02:53 AM

Hi,

I would like to draw a circle on X and Y axis. I am using PMAC2-PC104.

I study in the manual there is circle1 and cirlce2 command.

I set i13=5;

I came accros this 2 command but I dont have any idea how to draw a 2mm circle.

X{} Y{} I{} J{}

X{} Y{} R{}

sqr(X) + sqr(y) = sqr®. I dont what is the value of X and Y that could give me R value 2.

In short, I need X and Y to have circular move that give me 2mm radius of circle

Please help me.

Thank you

I would like to draw a circle on X and Y axis. I am using PMAC2-PC104.

I study in the manual there is circle1 and cirlce2 command.

I set i13=5;

I came accros this 2 command but I dont have any idea how to draw a 2mm circle.

X{} Y{} I{} J{}

X{} Y{} R{}

sqr(X) + sqr(y) = sqr®. I dont what is the value of X and Y that could give me R value 2.

In short, I need X and Y to have circular move that give me 2mm radius of circle

Please help me.

Thank you