Jump to content
OMRON Forums

PMAC CNC Lathe Threading Problem


mohsin ahmad

Recommended Posts

i am facing problem while i am trying to make threads on my lathe. actually it goes off track or its path while in threading mode.i have tried g32 and g76. here is my configuration for spindle and z axis. z axis has no backlash , max following error 0.003mm. ixx28=0, 10000 counts/ revolution.

 

for spindle

encoder counts 4096/rev

max spindle speed 1875rpm

i7042=3

i've checked c channel pulse .its fine and updating.

but problem is still there. threading goes off track about 0.1mm every round.

Link to comment
Share on other sites

  • Replies 2
  • Created
  • Last Reply

Top Posters In This Topic

Guest
This topic is now closed to further replies.

×
×
  • Create New...