Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Auto and MDI alarm. MACHINE DOWN!
System was running fine.
Now whenever I switch into Auto mode or MDI mode I get this alarm
"Syntax Fatal: Can Not Close Rotary Buffer! File C:\Part Progams\......"

I noticed the rotary buffer display on the NC display "Buffer Closed" "0/0"

This alarm locks up the NC software!
Please contact our technical support group with details on the machine setup:

Forum Jump:

Users browsing this thread: 1 Guest(s)