Windows 10 - IDE fails to map variables

Hi I have just setup my home working system. New PC, clean Windows 10 RTM install, PPMAC IDE 2.0.3.40, 460EX PPMAC CPU running FW 2.0.2.14.

My project fails. A new blank project fails.

Right-click project, Build and Download all Programs gives the following dialog:

---------------------------

Mapping power PMAC variables failed

---------------------------

Mapping power PMAC variables Failed. Do you wish to continue the build process.

---------------------------

Yes No

---------------------------

and the following output:

Please wait while mapping Power PMAC variables.

Syncing Database Failed.

Failed to map PMAC variables.

Project Building and Mapping total time = 67.531 sec

I cannot find any log messages in the project or IDE folders. Where to start looking?

Try this... I have Win10 as well and have seen similar issue, not sure if same:

http://forums.deltatau.com/showthread.php?tid=1991&highlight=zombie

Also be sure running application as Admin.

Thanks for the suggestions. I didn't want to reset my firewall rules, but you did encourage me to run as Administrator (right-click Run As..., rather than just letting it elevate).

This appeared to do something, I got the rsync firewall requests and then it worked. Running normally from the shortcut after that worked too.

So not sure of exact details of what did it but I am running. Thanks for the nudge

Also be sure running application as Admin.

Resetting firewall is no big deal... after that you will get the prompts to allow the IDE to work. Seems you accomplished the same or similar by elevating the privileges.

Glad it is working... congrats and thanks for getting back.