kjcho Posted May 19, 2015 Share Posted May 19, 2015 Hi. Is it possible to create a such as NC14 program , by using the PDK? Thank you Link to comment Share on other sites More sharing options...
Omron Forums Support Posted May 19, 2015 Share Posted May 19, 2015 What is NC14? The PDK can be used for virtually any HMI application, including CNC, but if you want CNC specifically, you can buy the Power NC application, which is designed for CNC. Link to comment Share on other sites More sharing options...
kjcho Posted May 20, 2015 Author Share Posted May 20, 2015 Please check attached NC14's screen shot file. Please tell me how to download the "sample software or screenshot" that has been developed using the PDK. Thank you Link to comment Share on other sites More sharing options...
Omron Forums Support Posted May 20, 2015 Share Posted May 20, 2015 Hi, You get the examples when you buy the PDK. Assuming you're in Korea, you can buy it from DT Korea or Daekhon, whose contact information is here: DELTA TAU KOREA J.Y. Park 701-ho, Unitech Vil. Baekseok, Ilsan, Koyang Kyungki-Do 411-722 South Korea Phone: 011 82-31-813-6156 Fax: 011 82-31-813-6155 dtkorea@deltatau.com http://www.deltatau.com DAEKHON CORPORATION Mijin Song 1201 Ace Techno Twin Tower 1 212-1 Guro-Dong Guro-Gu Seoul 152-050 Korea Phone: 82 2 6675-6628 Fax: 82 2 6675-6644 std@daekhon.co.kr http://www.daekhon.co.kr Link to comment Share on other sites More sharing options...
steve.milici Posted May 20, 2015 Share Posted May 20, 2015 Note that our Power PMAC NC software was developed under a different platform not just with the PDK. You can purchase the NC software with the development platform: Power PMAC NC 14 Software Development Kit (Two Runtime Licenses Included) PPNC-0000000-002-000 Site License, Redistributable, Runtime Licenses Required for deployment. Link to comment Share on other sites More sharing options...
Omron Forums Support Posted May 21, 2015 Share Posted May 21, 2015 The PDK is not designed to create an extensive program such as the PMAC NC 14. PMAC NC 14 includes many complex functions and would take a significant amount of time to re-create. If you need the functionality which is containted in NC14, but need to customize it, the Power PMAC NC 14 SDK could be a good solution. Link to comment Share on other sites More sharing options...
kjcho Posted May 27, 2015 Author Share Posted May 27, 2015 I know that NC14 is provided two run-time license. Redistribution of applications developed using the sdk is possible without a license? Link to comment Share on other sites More sharing options...
Omron Forums Support Posted May 28, 2015 Share Posted May 28, 2015 Power PMAC NC 14 requires a per machine license. Most OEM's will benefit from this architecture and we have programs in place to insure a high level of value is provided. In general the NC 14 is a more economical route vs. in-house development even with per license costs. Link to comment Share on other sites More sharing options...
andreychip Posted May 29, 2015 Share Posted May 29, 2015 Hi. You can tell the price Power PMAC NC 14 Software Development Kit (Two Runtime Licenses Included) PPNC-0000000-002-000 for Russia? Thanks. Link to comment Share on other sites More sharing options...
steve.milici Posted May 29, 2015 Share Posted May 29, 2015 Check with the Russian Distributor: MECHATRONIKA, LTD (repair/service center.) Yuriy Tararykin Lebedeva-Kumacha Street Building 2A Office 201 Ivanovo 153003 Russia Phone: 0074932269777 Fax: 0074932269987 info@mtronics.ru http://www.mtronics.ru Link to comment Share on other sites More sharing options...
kjcho Posted June 2, 2015 Author Share Posted June 2, 2015 Here's 3 questions. 1. Is NC14 still under developing? Why NC14 is not listed on deltatau.com? 2. I want to developement my own NC system using Turbo pmac or Power pmac and it would be used on 10~20 machines. Is it possible to use NC software developed with NC14 SDK in that way? What is 2-runtime license? Is license needed using my own software developed with NC14 SDK? 3. I found NC14 on the web but I have no information about it. Can I ask NC14 manual or application example?? Thank you. Link to comment Share on other sites More sharing options...
steve.milici Posted October 14, 2015 Share Posted October 14, 2015 We do not currently have an official demo version. I may be able to provide something like this in the near future. I will post when I have it. Link to comment Share on other sites More sharing options...
andreychip Posted July 1, 2016 Share Posted July 1, 2016 1.What delivery times NC14 in russia? 2.How many axis available for Russia? Link to comment Share on other sites More sharing options...
steve.milici Posted July 5, 2016 Share Posted July 5, 2016 Please contact the distributors there for price and delivery. We are limited by export restrictions to 4 axes. You can find our distributors on our website here: http://www.deltatau.com/DT_DistributorsAndIntegrators/DistributorsAndIntegrators.aspx Link to comment Share on other sites More sharing options...
andreychip Posted July 5, 2016 Share Posted July 5, 2016 thank you. Link to comment Share on other sites More sharing options...
Recommended Posts