04-20-2015, 10:18 PM
My problem is when the first power up my PMAC2-PC104. I using the PEwin32PRo, in the POSITION WINDOW, the position for 4 axis is 0.4. May I know why this happen and how to set it to 0 cts when first power up?[/align]
initial POS at 0.4 cts
|
04-20-2015, 10:18 PM
My problem is when the first power up my PMAC2-PC104. I using the PEwin32PRo, in the POSITION WINDOW, the position for 4 axis is 0.4. May I know why this happen and how to set it to 0 cts when first power up?[/align]
04-22-2015, 04:56 PM
Issue the "HMZ" command for the motor:
#1 HMZ This should set it to zero. |
« Next Oldest | Next Newest »
|