Send and run with rotary buffer.

I need to run very large programs which are on the hard disk of the PC. I intend to use the rotary buffer to send it. On the forum, i found only an information (post by BradP 04-05-2010) supposing that the program file was already in the Linux area on the PPmac. Have you an example of code running on Windows (c#, visualBasic,...) to send and run a big program file ? Thanks

To do this you need to combine two ideas. 1. You need to setup a shared network folder so the PPmac has access to the data on the PC. Look in this post for instructions. http://forums.deltatau.com/showthread.php?tid=52&highlight=network 2. Now that the file is accessible from PPmac you use the standard rotary buffer method described in this posting http://forums.deltatau.com/showthread.php?tid=168&highlight=rotary+buffer. Just remember that the filename includes the path. My suggestion would be to take this in steps. First would be to configure the PPmac so that it can run a standard program. Second would be to run a rotary buffer program which is stored locally. Third would be to access a networked file from the linux. Just use telnet and ls the program. Fourth is to run the networked file through the rotary buffer.