matthew.brewer Posted January 13, 2015 Share Posted January 13, 2015 We just upgraded from a Turbo Umac 5C0 cpu card to a 5C3 card (memory upgrade only). I have updated all the memory locations for the modbus and all machine functions appear to be working correctly. Upon start-up of PEWin32Pro I get a warning that says the following: "Due to Modbus activity, CommThread will not be started at this time. Unsolicited messages will not be captured properly" This goes away if I put in the 5C0 card again. I am probably missing a setting that I don't know about. Link to comment Share on other sites More sharing options...
matthew.brewer Posted January 13, 2015 Author Share Posted January 13, 2015 We just upgraded from a Turbo Umac 5C0 cpu card to a 5C3 card (memory upgrade only). I have updated all the memory locations for the modbus and all machine functions appear to be working correctly. Upon start-up of PEWin32Pro I get a warning that says the following: "Due to Modbus activity, CommThread will not be started at this time. Unsolicited messages will not be captured properly" This goes away if I put in the 5C0 card again. I am probably missing a setting that I don't know about. Link to comment Share on other sites More sharing options...
steve.milici Posted January 14, 2015 Share Posted January 14, 2015 If Modbus is active (I67>0) and the User Buffer is populated when the Executive is started then you will get this message. Link to comment Share on other sites More sharing options...
steve.milici Posted January 14, 2015 Share Posted January 14, 2015 If Modbus is active (I67>0) and the User Buffer is populated when the Executive is started then you will get this message. Link to comment Share on other sites More sharing options...
Recommended Posts