mshaver Posted June 16, 2014 Share Posted June 16, 2014 I need help with basic setup and addressing of an ACC-65E. I have a PPMAC with a ACC-24E2A in the first (non-CPU) slot and an ACC-65E in the second slot. From reading the ACC-65E User Manual, here's what I think I am supposed to do. >> Since this is the first ACC-65E in the rack, I think I am supposed to set ALL SW1 switches to ON. Is this correct? Please recalibrate me if not. >> To access the intputs and outputs, I declare pointers such as; PTR Input1->ACC65E[0].DataReg[0].0.1; PTR Input2->ACC65E[0].DataReg[0].1.1; etc. and PTR Output1->ACC65E[0].DataReg[3].0.1; PTR Output2->ACC65E[0].DataReg[3].1.1; Must I do anything else or is this it? Thanks; MShaver Link to comment Share on other sites More sharing options...
steve.milici Posted June 16, 2014 Share Posted June 16, 2014 Yes this is all that is needed with all switches in the "on" position. Link to comment Share on other sites More sharing options...
Recommended Posts