Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Changing the PPmac nameserver and gateway
#1
--- To change the nameserver do the following from telnet.
1. goto the proper directory --> cd /.readonly/etc
2. make the folder read write --> mount -o remount,rw /
3. create and or edit the file --> resolv.conf It needs to have the line
nameserver {ip} example nameserver 10.10.98.7
4. make the folder read only --> mount -o remount,ro /
5. reboot the ppmac

--- To change the gateway it is easiest to use the IDE. Go to
tools->options and select PowerPMAC->IP Address Change Setup. Here you can
change the gateway.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)