Jump to content
OMRON Forums

Geo Brick LV Setup Assistant Spreadsheet


Sina.Sattari

Recommended Posts

Geo Brick LV Setup Assistant Spreadsheet is updated to version 2.9 with following changes:

 

The spreadsheet supports parameter settings for Stepper motors with real feedback (such as Quadrature). These Stepper motors are setup as "high count pole-pair brushless motors".

 

If Encoder Type for any motor type is selected as Microstepping, then Step Angle and Max RPM values are used for Microstepping calculations, regardless of type of motor.

 

If any Encoder Type other than Microstepping is selected, both servo and commutation will use the selected encoder type and no Microstepping commutation method is used.

 

Download Link: http://forums.deltatau.com/filedepot/download.php?f=Turbo%20PMAC/Tools/Geo%20Brick%20LV/Geo%20Brick%20LV%20Setup%20Assistant%202.9.xls [FILE REMOVED]

Link to comment
Share on other sites

  • Replies 0
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Guest
This topic is now closed to further replies.

×
×
  • Create New...