aTURBOPMAC2USER Posted December 9, 2013 Share Posted December 9, 2013 Dear all, in the user manual of ACC-28E(newest version,which can be downloaded from the manual page), page 14, does the addresses of node 7,10,11 are the right addresses? Link to comment Share on other sites More sharing options...
Gregs Posted December 9, 2013 Share Posted December 9, 2013 Those addresses are incorrect. Node 7 addresses are X:$C0AC,C0AB,C0AE,C0AF; Node 10 are X:$C0B0,C0B1,C0B2,C0B3; Node 11 are X:$C0B4,C0B5,C0B6,C0B7 addresses. This is corrected in the new edition which hopefully will be released soon. Thanks for reporting. Link to comment Share on other sites More sharing options...
steve.milici Posted December 9, 2013 Share Posted December 9, 2013 See the next page for Turbo PMAC addresses. Link to comment Share on other sites More sharing options...
Gregs Posted December 9, 2013 Share Posted December 9, 2013 Turbo addresses are correct, but MACRO Station and PMAC2 Ultralite addresses on page 14 are incorrect, as stated in my last post. The correct addresses can also be seen in other I/O accessory manuals such as the ACC-11E or ACC-65E. Link to comment Share on other sites More sharing options...
Recommended Posts