RemyGM Posted March 13, 2013 Share Posted March 13, 2013 PowerPmac_UDP.zip Attached is a simple project wich send UDP frame(see read_me.txt). I would send UDP frame at a frequency of 100Hz to an other device. To do that, I send UDP frame in rticplc. Everything works fine until I open SSH or SFTP connection to PPMAC. Each time I open SSH connection and running "gpascii -2" or each time I open a window in PPMAC IDE (like "STATUS"), execution time of rticplc increases up to 30ms when it was executed in 250µs. The same problem appears in bgcplc (and in capps) when I send UDP frame from bgcplc (and from capps). Did someone already observed this phenomenom and/or has already corrected it ? I have already read this post but it doesn't solve my problem: http://forums.deltatau.com/showthread.php?tid=563&highlight=RTnet Link to comment Share on other sites More sharing options...
Recommended Posts