Jump to content
OMRON Forums

Driver for Windows 7- 64Bit


Raghav

Recommended Posts

Hi All,

I would like to know the installation procedure for Win7-64Bit processor. Also I wold like to get the latest installation package for the same. I'm using Turbo PMAC2 CPU ith Acc-24E2A axis card. Hoping to get a quick response and the needed software as we have started with a new project.

 

Thank you all in advance.

 

Regards,

Raghav

Link to comment
Share on other sites

  • Replies 5
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Hello Raghav,

 

Here is a link to a free 30-day trial period of the PMAC Exective Pro2 Suite:

http://www.deltatau.com/DT_Products/SoftwareDevelopment.aspx

 

Please contact your distributor for purchasing a licensed copy.

 

I recommend the following for setup documentation:

 

The PEWIN manual:http://www.deltatau.com/manuals/pdfs/PEWIN%2032%20PRO%202%20SOFTWARE.pdf?id=634939535553153092

 

In PEWIN, use the Turbo/UMAC Setup Pro2 tool from the Tools menu.

 

The ACC-24E2A manual: http://www.deltatau.com/manuals/pdfs/ACC-24E2A.pdf?id=634939535575183214

 

Also, see the Turbo Software Reference and User manuals.

 

The latest version of PEWIN32 Pro2 works with Windows 7, and with 64-bit systems the following is necessary:

 

Right click on the Pewin32 Pro2 icon, select Properties, and then the Compatibility tab. Then, check the box for Run this program as an administrator.

Link to comment
Share on other sites

Raghav,

 

The latest Installation of Pewin32PRO2 is true for 32-bit as well as 64-bit operating systems.

 

It is available on Delta Tau's website under software downlaods at following URL.

 

http://www.deltatau.com/DT_Products/SoftwareDetails.aspx?CatID=500-PMAC%20EXECUTIVE%20PRO2%20SUITE

 

Also, look at the 64-Bit update NOTE.

 

http://www.deltatau.com/Common/Product%20Bulletins/Updates/PMAC%20Executive%2064-Bit%20Drivers%20upgrade.pdf

 

 

Hi All,

I would like to know the installation procedure for Win7-64Bit processor. Also I wold like to get the latest installation package for the same. I'm using Turbo PMAC2 CPU ith Acc-24E2A axis card. Hoping to get a quick response and the needed software as we have started with a new project.

 

Thank you all in advance.

 

Regards,

Raghav

Link to comment
Share on other sites

Hi All,

I'm yet to solve the driver issue. Windows doesn't recognize the driver. I tried all possible methods mentioned. Currently I had installed PEWinPro2 and also tried with re-installation of the DT64Bit Drivers. Still I don't get through the driver issue. I'm attaching the screen-shot of the driver error when I try to locate the Pmacusb.inf file in the Windows\inf\ directory. i also checked with the version of the driver file and it corresponds to 4.3.0.0.

 

Kindly help me sorting out this issue at the earliest. Just to know, does the Pcomm32 software helps in communication? If so should i use the 64bit version of Pcomm?

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.

×
×
  • Create New...