Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How to calculate the PhaseFreq from/to PhaseServoClockCtrl bits 31-16
#1
Today I was trying to understand the following text in Power PMAC software reference manual which explained the conversion from Gate3[].PhaseFreq to upper 16 bits of Gate3[].PhaseServoClockCtrl.

Quote:The partial-word element PhaseFreq is stored as a normalized 16-bit floating-point value with a 4-bit exponent (base 2) in bits 28 – 31 and a 12-bit fractional mantissa (implied “1”) in bits 16 – 27. The stored value is divided down by a factor of 35.76 (600,000,000/16,777,216) from the value entered into the element.

I had to do this calculation in C so I had to understand the conversion, so I made the following Excel spreadsheet. It should be self-explanatory.


.xls   PhaseFreq_Mantissa_Conversion.xls (Size: 28.5 KB / Downloads: 24)
Sina Sattari
Hardware Engineering Manager
Delta Tau Data Systems, Inc.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)