Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How to transfer PEWIN32PRO2's software license to a different computer
#1
Follow these steps to transfer software authorization from one computer to another:

1) Install the PMAC Executive PRO2 Suite software package on the TARGET computer and run it. Once prompted choose to register the software and the software will provide you with a Site Code. (the Site Code will be generated after installing the trial version, downloadable from http://www.deltatau.com )

2) Obtain the Site Code from the TARGET computer.

3) Run the PEWIN32PRO2 on the SOURCE computer which already has the license.
4) From the Help menu, Choose “Transfer License” on the SOURCE computer.
5) Enter the Site Code from the TARGET computer that you got in step 2 into the "Site Code" field on the SOURCE computer.
6) Click on "Transfer" on the SOURCE computer.

WARNING: You will be asked to verify the transfer. If you click yes, then this installation of the software will be disabled on the SOURCE computer. The only way to reenable the software will be by transferring it back from another authorized machine.

7) A transfer key will be automatically generated and placed into the "Transfer Key" field. Write down this key.

8) Complete the transfer by entering the transfer key into the "Site Key" field on the Authorization form of the TARGET computer following the outlined procedure.
Sina Sattari
Hardware Engineering Manager
Delta Tau Data Systems, Inc.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)